Coming out of the machine after machining, our parts are cleaned of any sharp edges and burrs while retaining marks. Without any added material, the part had a surface roughness of 3.2 μm (126 μin).
Band blasting cleans the surface of any impurities and peels coating through the propelling of blast media streams over the parts.
To increase surface hardness and dissipate heat, we use anodizing techniques to enhance the look of parts and blend well for painting and priming.
Electroplating reduces metal cations in the electrolyte solution, producing a metallic coating on a metal surface. This process can be used for purposes of corrosion and wear resistance, as well as for decorative purposes.
Working on metal and hard plastics, our polishing uses highly efficient machinery to get our parts between Ra 0.8~Ra0.1 for a cleaner surface.
We apply a thin layer of protective polymer with the corona discharge phenomenon to give our part a lasting finish that protects from impacts and prevents wearing down.
Our brushing technique uses abrasive belts over the material to create diverse patterns that match the parts’ structure and color.
Painting involves Spray droplets can be dispersed uniformly or in fine amounts to cover a wide surface area and bring out greater color to the part.
Adding layers to metallic surfaces like steel, our black anodized technique improves appearance while maintaining durability.
We use chromate conversion coating or alodine to protect aluminum and other materials from corrosive elements, usually done before priming and painting parts.
Helpful in brand recognition or parts organization, we use laser carving that applies various printing methods during full-scale production to quickly embed barcodes, lettering and logos on the parts.
Introduction to Brass
Brass, a metal alloy composed of copper and zinc, boasts excellent machinability and high electrical conductivity. Its low friction properties and gold-like appearance make it a popular choice for manufacturing gears, locks, pipe fittings, musical instruments, and other products. Additionally, brass is commonly used in the construction industry.
Information of Brass
Brass parts machining and manufacturing is one of our main type,below is some common information about brass.
|CNC machining, sheet metal fabrication
With drawing: as low as +/- 0.005 mm No drawing: ISO 2768 medium
Gears, lock components, pipe fittings, and ornamental applications
NONLE has dealed with warioud brsss subtypes for parts machining:
Elongation at Break
Brass C360 is a soft metal with the highest lead content amongst brass alloys. It is known for having the best machinability of brass alloys and causes minimal wear on CNC machine tools. Brass C360 is broadly used for fabricating gears, pinions and lock parts.
0.307 lbs / cu. in.
Surface Finishes for Your Choosing
NOBLE has more than ten years of experience in surface treatment and excellent engineers, who are proficient in surface treatment of plastics, metals, and composite materials, and can turn your dream prototype or parts into reality.